View GKTW70SP8D1S0_134417.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
1 / 26
Thin-Film-Transistor LCD Module Model: GKTW70SP8D1S0
Acceptance
Solomon Goldentek Display Corp.
18 Ta-Yeh St., Ta-Fa Industrial Park,Ta-Liao Hsiang, Kaohsiung Hsien 831, TAIWAN R.O.C
FAX: 886-7-788-6806~8
Approved and Checked by
Approved by
Checked by
Made by
David Lee SEP/18/08
David Lee SEP/18/08
Kobe Su SEP/18/08
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
2 / 26
Revise Records Rev. A Date 2008/09/18 Contents Preliminary Specification Written Kobe Su Approved David Lee
Special Notes Note1. Note2. Note3. Note4. Note5.
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
3 / 26
Contents
1. General Description and Features........................................................................4 Features.................................................................................................................4 LCD Module...........................................................................................................4
1.1 1.2 2. 3.
Mechanical Information.................................................................................4 Electrical Specifications...........................................................................................5 Absolute Max. Ratings...........................................................................................5 Electrical Characteristics........................................................................................7 AC Timing Characteristic of The LCD.....................................................................8 Back-Light Unit.....................................................................................................10 Optical characteristic of the LCD.........................................................................11 Optical characteristic of the Back-Light...............................................................14 Touch Screen Panel Specifications.......................................................................15 Pin Assignment.....................................................................................................16 Back-light Unit (BLU)........................................................................................... 17 Touch Screen (TSP)............................................................................................. 17 Block Diagram.......................................................................................................18
3.1 3.2 3.3 3.4 4. 4.1 4.2 5. 6. 5.1 6.1 6.2 6.3 6.4 7. 8. 9.
Optical Characteristics........................................................................................11
Touch Screen Panel................................................................................................15 I/O Terminal.............................................................................................................16
Test.............................................................................................................................20 Appearance...............................................................................................................21 Inspection.............................................................................................................21 Precautions...............................................................................................................22
8.1
10. Warranty....................................................................................................................25 11. Dimensional Outlines..............................................................................................26
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
4 / 26
1.
General Description and Features GKTW70SP8D1S0 is a transmissive type color active matrix TFT (Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT-LCD module, a driver circuit and a back-light unit. Graphics and texts can be displayed on a WVGA 800 (W) x 3 x 480 (H) dots (16:9 aspect ratio) with 262,144 colors by supplying 18 bits data signal (6bits/each color). The following table described the features of. GKTW70SP8D1S0 1.1 1.2 Features Transmissive and back-light with 27 LEDs are available. TN (Twisted Nematic) mode. Digital RGB (6bits/color) data transfer. Data enable mode. Data inverted function for reducing EMI. LCD Module Item Screen Size Display Resolution Active Area Outline Dimension Display Mode Pixel Arrangement Pixel Size Display Color Viewing Direction Input Interface TFT Driver Specification 7.0 inches 800 (H) x 480 (V) 152.40 (H) x 91.44 (V) 165.00 (H) x 104.00 (V) x 6.55 (T) Normally white mode/ Transmissive R,G,B Vertical Stripe 190.5 x 190.5 Full Colors 6 o'clock Digital RGB (6bits/color) Data Transfer Source: HX8232-A02x3, Gate: HX8643Ax1 Unit Diagonal Pixel mm mm --um -----
2.
Mechanical Information Item Horizontal (H) Module Size Vertical (V) Thickness (T) Weight Min. ----Typ. 165.00 104.00 6.55 155 Max. ----Unit mm mm mm g (1) -Note
Note (1) Exclude Component . Refer to the Outline Dimension Drawing as attached.
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
5 / 26
3.
Electrical Specifications 3.1 Absolute Max. Ratings 3.1.1 Absolute Ratings of Environment If the operating condition exceeds the following absolute maximum ratings, the TFT LCD module may be damaged permanently. (Ta=252C, VSS=GND=0) Item Storage temperature Operating temperature Symbol TSTG TOPR Min. -20 -10 Max. 70 60 Unit C C Note (1) (1,2,3)
Note (1) 95 % RH Max. ( 40 C Ta ). Maximum wet-bulb temperature at 39 C or less. (Ta > 40 C) No condensation.
Note (2) In case of below 0, the response time of liquid crystal (LC) becomes slower and the color of panel becomes darker than normal one. Level of retardation depends on temperature, because of LC's character Note (3) Only operation is guarantied at operating temperature. Contrast, response time, another display quality are evaluated at +25C.
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
6 / 26
3.1.2 Electrical Absolute Maximum Ratings (VSS=GND=0) Parameter Power supply voltage Signal input voltage Permissive input ripple voltage Display On/Off Sequence : Symbol VCC R0-R5,G0-G5, B0-B5,DCLK,DE VRF Min. -0.3 -0.3 -Max. 5.0 Vcc+0.3 100 Unit V V mVp-p -VCC=+3.3V Remark
Data: DCLK, R0 R5, G0 G5, B0 B5, DE T110ms, 50msT2, 0Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
7 / 26
3.2 Electrical Characteristics 3.2.1 DC Electrical Characteristics of the TFT LCD (Ta=252C, VSS=GND=0) Item Power supply Input Voltage for logic H Level L Level Symbol VCC VIH VIL ICC Min. 3.0 2.0 0 Typ. 3.3 150 Max. 3.6 VCC VCC 200 Unit V V V mA Note 2 Remark Note 1
Power Supply current Note1: Vcc-dip conditions
Vcc-dip conditions should also follow the Vcc-turn-on conditions Td 10ms
Note2:
fv =60Hz , Ta=25C , Display pattern : 64 Gray pattern
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
8 / 26
3.3 AC Timing Characteristic of The LCD 3.3.1 Signal Timing Condition (DE only mode) Parameter DCLK period DCLK Frequency DCLK High plus width DCLK Low plus width Data setup time DATA Data hold time Rise/Fall Time Setup Time Hold Time Rise/Fall Time Horizontal Period DE Horizontal Valid Horizontal Blank Vertical Period Vertical Valid Vertical Blank Vertical Frequency Symbol Min. 31 25 6 6 5 10 5 10 16 850 50 490 10 55 900 800 100 500 480 20 60 40 65 Hz 150 550 tHP 950 Typ. 37.0 27 Max. 40.0 32.2 10 Unit. ns MHz ns ns ns ns ns ns ns ns Remark
tCLK fCLK tWCH tWCL tDS tDH tDr, tDf
tDES tDEH tDEr, tDEf tHP tHV tHBK tVP tVV tVBK fV
tCLK
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
9 / 26
3.3.2
Timing Characteristic 3.3.2.1 DE and RGB Input Timing
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
10 / 26
3.4 Back-Light Unit The Back-light system is an edge-lighting type with 27 white LED (Light Emitting Diode)s. The characteristics of 27 white LEDs are shown in the following tables. (Ta= Room Temp) Characteristics Forward Voltage Power Consumption Symbol Vf PBL(Vf X IB) Min. (9.3) (1674) Typ. Max. (9.9) (1782) Unit V mW Note (1)
Note (1) LEDS in 3 series x 9 parallel type. IB condition=180mA.
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
11 / 26
4.
Optical Characteristics 4.1 Optical characteristic of the LCD The following items are measured under stable conditions. The optical characteristics should be measured in a dark room or equivalent state with the methods shown in Note (1). Measuring equipment: BM-5A, BM-7 Item Brightness Response time Contrast ratio Color Gamut Red Color Chromaticity (CIE 1931) Green Blue White Hor. Ver. Tr Tf CR NTSC % Rx Ry Gx Gy Bx By Wx Wy R L H L CR10 =0 Normal Viewing Angle =0 At optimized viewing angle -Symbol Condition Min 400 -(350) -0.562 0.294 0.258 0.496 0.090 0.080 0.257 0.299 55 55 40 50 Type 500 15 25 (400) 50 0.612 0.344 0.308 0.546 0.140 0.130 0.307 0.349 65 65 50 60 Max -20 35 --0.662 0.394 0.338 0.596 0.190 0.180 0.357 0.399 ----Degree Unit cd/m2 ms ms -% ----. Note
Viewing Angle (6H)
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
12 / 26
a. Test equipment setup After stabilizing and leaving the panel alone shall be warmed up for the stable operation of LCM, the measurement should be executed. Measurement should be executed in a stable, windless, and dark room. Optical specifications are measured by Topcon BM-7(fast) with a viewing angle of 2 at a distance of 50cm and normal direction. b. Definition of response time: Tr and Tf The response time is defined as the following figure and shall be measured by switching the input signal for "black" and "white".
c.
Definition of contrast ratio: Brightness measured when LCD is at "white state" Contrast Ratio (CR) = Brightness measured when LCD is at "black state"
d. Measured at the center area of the panel when all the input terminals of LCD panel are electrically opened.
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
13 / 26
e. View Angle
f.
Definition of Luminance of White: Luminance of white at the center points Light Source of Back-Light Unit LED Type
g. Definition of White Uniformity White Uniformity = Min. luminance of white among 5-points Max. luminance of white among 5-points
h. The definition of Color Gamut -Color Chromaticity CIE 1931 Color coordinate of white & red, green, blue at center point. Color Gamut : NTSC(%) = ( RGB Triangle Area / NTSC Triangle Area ) x 100
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
14 / 26
4.2 Optical characteristic of the Back-Light Item Luminance (9 points AVG.) Color Uniformity Lighting type Symbol IV -U 70 Min. -Typ. 7000 White 80 Side Lighting -Max. -Unit cd/m2 -% Remark ----
Note (1) The measurement instrument is BM-7 luminance color-meter the measuring distance is 500 20mm. The uniformity definition (Min. brightness / Max. brightness) x 100%.
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
15 / 26
5.
Touch Screen Panel 5.1 Touch Screen Panel Specifications 5.1.1 Electrical Characteristics Item Linearity Terminal resistance Insulation resistance Voltage Chattering Transparency Min. -1.5 260 200 20 Typ. 5.0 82 Max. 1.5 800 400 7.0 10 Unit % M V ms % X(Top Layer) Y(Button Layer) DC 25V DC 100k pull-up Non-glare Note Analog X and Y directions
Caution (1) : Do not operate it with a thing except a polyacetal pen (tip R0.8mm or less) or a finger, especially those with hard or sharp tips such as a ball point pen or a mechanical pencil. 5.1.2 Mechanical & Reliability Characteristics Item Activation force Durability-surface scratching Durability-surface pitting Surface hardness Note (1) Note (2) Min. Write 100,000 1,000,00 0 3 Typ. Max. 80 Unit g characters touches H Note (1) (2) (3) JIS K5400,ASTM D3363
Stylus pen Input : R0.8mm polyacetal pen or Finger Measurement for Surface area - Scratch 100,000 times straight line on the Film with a stylus change every 20,000times - Force : 150gf - Speed : 100mm/sec - Stylus : R0.8 polyacetal tip Note (3) Pit 1,000,000 times on the Film with a R8.0 silicon rubber. - Force : 250gf - Speed : 3times/sec
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
16 / 26
6.
I/O Terminal 6.1 Pin Assignment Symbol GND GND NC VCC VCC VCC VCC NC DE GND GND GND B5 B4 B3 GND B2 B1 B0 GND G5 G4 G3 GND G2 G1 G0 GND R5 R4 R3 GND R2 R1 I/O -I I I I I I I I ---I I I -I I I -I I I -I I I -I I I -I I Ground Ground No Connection Power Supply Power Supply Power Supply Power Supply No Connection Data Enable Timing Signal Ground Ground Ground Blue data signal (MSB) Blue data signal Blue data signal Ground Blue data signal Blue data signal Blue data signal (LSB) Ground Green data signal (MSB) Green data signal Green data signal Ground Green data signal Green data signal Green data signal (LSB) Ground Red data signal (MSB) Red data signal Red data signal Ground Red data signal Red data signal Function Remark Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
17 / 26
35 36 37 38 39 40 Remarks:
R0 GND GND DCLK GND GND
I -----
Red data signal (LSB) Ground Ground Data Clock Ground Ground
I: Input, O: Output, P: Power 1) NC Pin must be retained; this pin can't contact GND or other signal. 2) GND Pin must ground contact, can not be floating.
6.2
Back-light Unit (BLU) Symbol LEDA LEDK Function Power Supply for LED backlight GND for LED backlight Remark RED BLACK
Pin No. 1 2 6.3
Touch Screen (TSP) Symbol Y2 X2 Y1 X1 Touch Panel Top Side Touch Panel Right Side Touch Panel Bottom Side Touch Panel Left Side Function Remark
Pin No. 1 2 3 4
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
18 / 26
6.4
Block Diagram
Y2,X2,Y1,X1
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
19 / 26
6.5 Displayed Color and Input Data Color & Gray Scale Black Red(0) Green(0) Blue(0) Cyan Magenta Yellow White Black Red(62) Red(61) : Red(31) : Red(1) Red(0) Black Green(62) Green(61) : Green(31) : Green(1) Green(0) Black Blue(62) Blue(61) : Blue(31) : Blue(1) Blue(0) Data Signal R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 : : : : : : : : : : : : : : : : : : 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 : : : : : : : : : : : : : : : : : : 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
Basic Color
Red
Green
Blue
0 : Low level voltage, 1 :High level voltage Each basic color can be displayed in 64 gray scales from 6 bit data signals. With the combination of total 18 bit data signals, the 262,144-color display can be achieved on the screen.
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
20 / 26
7.
Test No change on display and in operation under the following test condition. Condition: Unless otherwise specified, tests will be conducted under the following condition. Temperature: 205C. Humidity: 655%RH. Tests will be not conducted under functioning state. No. 1 2 3 4 5 Parameter High Temperature Operating Low Temperature Operating High Temperature Storage Low Temperature Storage Damp Proof Test Condition 60C2C, 120hrs (Operation state). -10C2C, 120hrs (Operation state). 70C2C, 120hrs. -20C2C, 120hrs. 40C2C, 9095%, 120hrs. Total fixed amplitude: 1.5mm. 6 Vibration Test Vibration Frequency: 1055Hz. One cycle 60 seconds to 3 direction of X, Y, Z each 15 minutes. To be measured after dropping from 60cm high on the concrete surface in packing state. 3 1 2 1,2 1,2 Notes
Dropping method corner dropping:
7.
Shock Test
A corner: Once edge dropping. B, C, D edge: Once face dropping. E, F, G face: Once.
Notes:
1. No dew condensation to be observed. 2. The function test shall be conducted after 4 hours storage at the normal temperature and humidity after removed from the test chamber. 3. Vibration test will be conducted to the product itself without putting I in a container.
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
21 / 26
8.
Appearance 8.1 Inspection The distance between the eyes and the sample shall be more than 30cm. All directions for inspecting the sample should be within 45 against perpendicular line.
Definition of Applicable Zones
A Zone : Active display area, B Zone : Area from outside of "A Zone" to validity viewing area C Zone : Rest parts, A Zone + B Zone = Validity viewing area (a) Operating Inspection The function and appearance shall be inspected in the condition of - Under 750 Lux or over light ........ Reflective Type. - Using over Backlight unit ............ Transflective Type, Transmissive Type. Condition of judgment In case of no gradation display it judges by applied On/Off voltage or optimal contrast. In case of gradation display it judges by contrast that the bad point is able to confirm best. (b) Appearance Inspection The appearance shall be inspected in the condition of - under 500 lx or over light ........ Reflective Type. - Using over Backlight unit ......... Transflective Type, Transmissive Type. (c) Inspection Environment Inspection environment it carried out with 250 Lux or less in principles.
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
22 / 26
9.
Precautions 9.1 Operation Burn-in sometimes happens when the same character was displayed at along time. Therefore, to prevent Burn-in, it is recommended to set up a Screen-saver function. 9.2 Safety The liquid crystal in the LCD is poisonous, DO NOT put it in your mouth. If the liquid crystal touches your skin or clothes, wash it off immediately using soap and water. 9.3 Handling
a. The LCD module shall be installed flat, without twisting or bending. b. COF or FPC has narrow pattern width, so easily become open circuit by external force. DO NOT apply pressure to COF or FPC especially in bending area.
c. To avoid damage in appearance or malfunction, DO NOT subject the module to mechanical shock or to excessive force on its surface.
d. The polarizer attached to the display is very easy to damage, handle it with care to avoid scratching.
e. To avoid contamination on the display surface, DO NOT touch the display surface with bare hands. f. Provide a space so that the LCD module does not come into contact with other components.
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
23 / 26
g. To protect the LCD panel from external pressure, put covering glass (acrylic board or similar board) to keep appropriate space between them.
h. Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur.
i. Property of semiconductor devices may be affected when they are exposed to light possibly resulting in malfunctioning of the ICs. To prevent such malfunctioning of the ICs, your design and mounting layout done are so that the IC is not exposed to light in actual use.
j. Strong light exposure causes degradation of color filter. It may not recover
k. DO NOT contact with water to avoid Metal corrosion. l. When it is not in use, the screen must be turned off or the pattern must be frequently changed by a screen saver. If it displays the same pattern for a long period of time, brightness down/image sticking may develop due to the LCD structure. m. Never disassemble LCD product under any circumstances. If unqualified operators or users assemble the product after disassembling it, it may not function or its operation may be seriously affected.
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
24 / 26
9.4
Static Electricity Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. a. The LCD module shall be installed flat, without twisting or bending. Ground soldering iron tips, tools and testers when they operate. b. Ground your body when handling the products. c. DO NOT apply voltage to the input terminal without applying power supply.
d. DO NOT apply voltage that exceeds the absolute maximum rating. e. Store the products in an anti-electrostatic container. f. 9.5 Storage Store the products in a dark place at +5 ~ +25 degree C, low humidity (50%RH or less). DO NOT store the products in an atmosphere containing organic solvents or corrosive gases. 9.6 Cleaning Peel off protect tape, attached to polarizer, slowly to minimize ESD damage.
a. DO NOT wipe the polarizer with dry cloth, as it might cause scratch. b. Wipe the polarizer with a soft cloth soaked with petroleum IPA, other chemical might damage.
9.7
Waste
When dispose of LCD module, manage it at the production waste according to the relevant laws and regulations.
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
25 / 26
10. Warranty This product has been manufactured to your company's specifications as a part for use in your company's general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in medical devices, nuclear power control equipment, aerospace equipment, fire and security systems, or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. If the product is to be used in any of the above applications, we will need to enter into a separate product liability agreement. 1 2 3 4 We cannot accept responsibility for any defect, which may arise from additional manufacturing of the product (including disassembly and reassembly), after product delivery. We cannot accept responsibility for any defect, which may arise after the application of strong external force to the product. We cannot accept responsibility for any defect, which may arise due to the application of static electricity after the product has passed your company's acceptance inspection procedures. We cannot accept responsibility for industrial property, which may arise through the use of your product, with exception to those issues relating directly to the structure or method of manufacturing of our product. SGD-origin longer than one year from SGD production.
Product Specification Model: GKTW70SP8D1S0 Rev. No. A Issued Date. SEP. 18, 08
www..com
Page.
26 / 26
11. Dimensional Outlines

▲Up To Search▲

Price & Availability of GKTW70SP8D1S0

	To Download GKTW70SP8D1S0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .